Paper Title, Times New Roman, 15, Bold

First Author Name*1, First Author Name2, and Third Author Name3 Authors name, Times New Roman, 13, Bold

1Department, University/Institute/Company Name, City, Country. Affiliations Times New Roman, 11, Italics.

2,3Department, University/Institute/Company Name, City, Country

DOI: xx.xxxx/lafsrj.xxxx

Abstract	Article History:
The abstract should concisely summarize the objectives, methodology, main findings, and conclusions of the paper. The abstract must be between 150 and 250 words and should not contain references, citations, abbreviations without definition, or displayed equations. Authors are required to strictly follow the formatting guidelines and margin specifications provided in this template to ensure consistency and uniformity throughout the published journal. Manuscripts that do not comply with these formatting requirements may be returned to the authors for revision prior to publication, even if the scientific content has been accepted. Compliance with both the scientific and formatting standards of the journal is a mandatory condition for publication. Text should be Times New Roman, 11.	Received: xx/xx/20xx Accepted: xx/xx/20xx Online publish: Keywords: Keywords: Keyword1; Keyword2; Keyword3; Keyword4; Keyword5;
عنوان البحث، نوع الخط Sakkal Majalla بحجم 15، غامق اسم المؤلف الأول*1، اسم المؤلف الثاني2، اسم المؤلف الثالث3 (الخط Sakkal Majalla بحجم 14، غامق 1 قسم، اسم الجامعة/المعهد/الشركة، المدينة، الدولة ، الانتماءات الخط Sakkal Majalla بحجم 12، غامق 2قسم، اسم الجامعة/المعهد/الشركة، المدينة، الدولة 3قسم، اسم الجامعة/المعهد/الشركة، المدينة، الدولة
بيانات البحث: استقبل: **/**/2026 قبل للنشر: **/**/2026 نشر الكترونيا: **/**/2026	المستخلص: يجب أن يقدّم الملخص عرضًا موجزًا لأهداف البحث، والمنهجية المتبعة، وأهم النتائج، والاستنتاجات الرئيسية للدراسة. يجب أن يتراوح عدد كلمات الملخص بين 150 و250 كلمة، وألا يحتوي على مراجع أو استشهادات أو اختصارات غير معرّفة أو معادلات معروضة. يُطلب من المؤلفين الالتزام التام بإرشادات التنسيق وهوامش الصفحة الموضحة في هذا القالب، وذلك لضمان الاتساق والتوحيد في النسخة النهائية المنشورة من المجلة. وقد تُعاد البحوث التي لا تلتزم بمتطلبات التنسيق إلى المؤلفين لإجراء التعديلات اللازمة قبل النشر، حتى وإن تم قبول محتواها العلمي. ويُعد الالتزام بالمعايير العلمية ومعايير التنسيق الخاصة بالمجلة شرطًا أساسيًا للنشر. الخط Sakkal Majalla بحجم 11.
الكلمات المفتاحية: الكلمة المفتاحية (1). الكلمة المفتاحية (2)، الكلمة المفتاحية (3)، الكلمة المفتاحية (4)، الكلمة المفتاحية (5)،

Introduction

Briefly present the research problem, objectives, and relevant background with appropriate citations. Avoid summarizing results or conclusions in this section. All body text should be Times New Roman, 11.

Materials and Methods

Provide sufficient detail to allow replication of the study. Reference previously published methods and specify any modifications. Include manufacturers’ names and addresses for equipment and reagents. Use subheadings where necessary.

Results

Present findings clearly and concisely. Use tables and figures where appropriate. Avoid interpretation or discussion of data in this section.

Tables

Tables should be set within the text. Submit tables and graphs as a photograph is not allowed. Avoid use internal horizontal and vertical rules. Tables should be set within the text and should have a clear and rational structure along with consecutive numerical order. All tables should be numbered (1, 2, 3, etc.). You should refer to your table in the text body as, Table (1) shows ,,,. Give enough information in subtitles so that each table is understandable without reference to the text. For each table, please supply a table caption (title) explaining the components of the table. Identify any previously published material by giving the original source in the form of a reference at the end of the table caption. Tables should be with the captions placed above in limited numbers. Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.

Table (1). Table Title.

Measurements	Mean ± SD	P < 0.05
Male (n=75)	Female (n=65)
Age (years)	38.05 ± 11.60	37.15 ± 9.50	0.615
Weight (Kg)*	76.39 ± 12.29	62.83 ± 8.66	0.000
Height (cm)*	175 ± 0.07	159 ± 0.05	0.000
Body mass index (kg/m2)	24.88 ± 3.31	24.66 ± 3.25	0.698
Waist circumference (cm)*	89.93 ± 8.81	82.08 ± 8.57	0.000
Hip circumference (cm)	101.08 ± 7.26	100.72 ± 7.35	0.774
Mean arterial blood pressure (mmhg)*	92.00 ± 9.09	86.81 ± 9.47	0.001

*Statistically significant difference of means at (CI 95%, P ≤ .05)

Figures

Figures/ illustrations should be in high-quality artwork, within 200-300 dpi. Ensure that figures are clear, labeled, and of a size that can be reproduced legibly in the journal. Figures should be set within the text. The following remarks should be applied to the figures:

- Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text of the manuscript.

- Figure captions begin with the term Figures. Figures should be with the captions placed below in limited numbers.

- No punctuation is to be placed at the end of the caption.

- Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.

- Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.

Figure (1). Figure name

Discussion

Interpret the results, compare them with previous findings, and discuss their implications. Conclude with a summary of the main findings.

Acknowledgments

List individuals, organizations, or funding bodies that contributed to the research.

Conflict of Interest

All authors must disclose any financial or personal relationships that could influence their work.

If none exist, include the statement:

“The Author(s) declare that there is no conflict of interest.”

Authors’ Contributions

Clearly describe the contribution of each author to the work. Contributions will be published with the final article.

Fundings

Specify all sources of financial support, including grant numbers. If there was no funding, state:

“This research received no specific grant.”

Data Availability

Provide a statement describing data accessibility. Examples include:

“All data supporting the findings of this study are available within the manuscript.”

“Data are available from the corresponding author upon reasonable request.”

“Data are available from the authors with permission from [organization], subject to licensing restrictions.”

Abbreviations and Units

Follow standard international conventions for abbreviations and units of measurement. Ensure all abbreviations are defined at first mention.

References

References list must be provided according to the format of the (LJAI) references in a consistent style. Where applicable, author(s) name(s). (Year of publication). Article title. Journal abbreviation. Volume (issue number): pagination. Doi:

A list of References should be formatted according to the IEEE style, using manual print only; using MS Word is the only method that is acceptable by LJAI. Cite about 15 up to 20 articles in a research article type and not exceeding 80 articles in a review article type. Personal communications or unpublished data should be mentioned in the text, but not included in the list of references.

In-Text Citations (Inline Citing), citations should be numbered in square brackets [1], [2], etc., in the order they appear in your text. With the following basic rules:

Place citation numbers inside square brackets, before the punctuation.

For multiple sources: [1], [3]–[5].

Examples:

... as shown in recent studies [1].

Smith and Jones [2] proposed a new algorithm.

Several methods exist [3]–[5], but this approach [6] is faster.

Reference List

At the end of your document, list all references in numerical order (the order they were first cited in text). Each entry starts with [1], [2], etc., followed by a space and the citation.

Examples of Common Source Types

Book

[#] A. Author, Book Title, xth ed. (if not first). City, State/Country: Publisher, year, pp. (if needed).

Journal Article

[#] A. Author, "Title of article," Journal Title, vol. X, no. Y, pp. zz–yy, Month Year.

Conference Paper

[#] A. Author, "Title of paper," in Conference Name, City, Country, Year, pp. xx–yy.

Technical Report

[#] A. Author, "Title of report," Institution, City, Country, Rep. no., Year.

Website / Online Source

[#] A. Author, "Title of page," Website name. Accessed: Mon. Day, Year. [Online]. Available: URL

Thesis / Dissertation

[#] A. Author, "Title of thesis," M.Sc. or Ph.D. dissertation, Dept., Univ., City, Country, Year.

Standard / Patent

Standard

[#] IEEE Standard for Floating-Point Arithmetic, IEEE Standard 754-2019, 2019.

Patent

[#] T. A. Edison, "Electric lamp," U.S. Patent 223 898, Jan. 27, 1880.

Text with in-text citations:

Several approaches to energy harvesting have been proposed [1], [3]. The method in [2] uses solar cells, while [4] compares piezoelectric and thermoelectric systems. As noted by Wang et al. [3], combining multiple sources improves reliability. The IEEE standards provide guidelines for efficiency measurement [7].

References

M. A. Nielsen and I. L. Chuang, Quantum Computation and Quantum Information, 10th ed. Cambridge, UK: Cambridge Univ. Press, 2010.

J. R. Smith and A. B. Jones, "Neural network optimization for image recognition," IEEE Trans. Pattern Anal. Mach. Intell., vol. 42, no. 5, pp. 1123–1135, May 2020.

L. Wang, Y. Zhang, and H. Li, "Energy harvesting in wireless sensor networks," in Proc. IEEE Int. Conf. Commun. (ICC), Paris, France, 2021, pp. 234–239.

S. K. Rao, "Analysis of 5G spectrum efficiency," Nokia Bell Labs, Espoo, Finland, Tech. Rep. TR-2022-07, 2022.

J. Doe, "Understanding IEEE citation style," IEEE Author Center. Accessed: Mar. 15, 2025. [Online]. Available: https://ieeeauthorcenter.ieee.org/

P. M. Chen, "Deep reinforcement learning for autonomous navigation," Ph.D. dissertation, Dept. Elect. Eng., Stanford Univ., Stanford, CA, USA, 2023.

IEEE Standard for Floating-Point Arithmetic, IEEE Standard 754-2019, 2019.

T. A. Edison, "Electric lamp," U.S. Patent 223 898, Jan. 27, 1880.