Study of Mechanical Properties of Concrete Using Recycled Styrene-Butadiene Rubber (SBR)

Authors

  • Mohamed Al-Abar Higher Institute of Engineering Technologies – Qourasha Author
  • Ahmed Al-Qadi Al-Zaytouna University – Tarhuna Author
  • Salahuddin Arefa National Research Foundation image/svg+xml Author

Keywords:

Concrete, SBR Rubber, Sustainability, Mechanical Properties, Recycling

Abstract

 This research addresses two important issues both locally and globally: environmental pollution and the significant economic return resulting from recycling and reusing materials without the costs of raw materials. One of the major industrial pollutants is waste from automobile tires made of Styrene-Butadiene Rubber (SBR).
In this study, recycled SBR aggregates smaller than 4.75 mm were used as partial replacements for fine aggregate at ratios of 10%, 20%, and 30%. Cement was also replaced with SikaTop-122 at different percentages (3%, 6%, 9%) in concrete.
The mechanical properties of concrete such as compressive strength, tensile strength, and density were investigated. Tests were conducted after 28 days. The experimental results indicated that replacing concrete with recycled SBR reduced compressive strength by 20.31%, 50.19%, and 58.9%, respectively, compared to control concrete, showing a negative impact. However, the replacement reduced concrete density, which contributes positively to producing lightweight concrete

Downloads

Download data is not yet available.

References

[1] Al-Azzawi, Z. M., & Al-Khameesi, D. T. (2010). Impact Resistance of Lightweight Chopped Worn-Out Tires Concrete. Engineering and Technology Journal, 28(16), 5200-5212

[2] Hamza, D. M., & Ghedan, R. H. (2011). Effect of rubber treatment on compressive strength and thermal conductivity of modified rubberized concrete. Journal of Engineering and Sustainable Development, 15(4), 21-29.

[3ا] نتصار قدوري جمعة, عبير فؤاد حسين, & بيداء قتيبة. (2011). تأثير مفروم الإطارات المطاطية علي بعض خواص الخرسانة A61-A71 . مجلة التقني, 24(8).

[4] Carrasco, M. F., Menéndez, G., Bonavetti, V., & Irassar, E. F. (2005). Strength optimization of “tailor-made cement” with limestone filler and blast furnace slag. Cement and Concrete Research, 35(7), 1324-1331.

[5] Rashwan, E. F. (2016). Effects of pre-treated recycled tire rubber on fresh and mechanical properties of concrete. Effects of pre-treated recycled tire rubber on fresh and mechanical properties of concrete

[6] Thiyab, H. M. (2017). Mechanical Properties of Light Weight Polymer Modified Concrete Made with Chopped Rubber Tires. Journal of University of Babylon, 25(4), 1169-1178.

[7] عبــد الرحمن يوسف خرسانات العزل الحراري والصوتي واستخدام الخرسانة المطاطية المجلة العربية للنشر العلمي (2022) (AJSP) ISSN: 2663-5798.

[8] هدى نعمة خليفة. (2005). تأثير اضافة رماد فحم الخشب على بعض خواص الخرسانة الطرية والمتصلبة. مجلة التقني, 18(2), A1-A7 .

[9] Carrasco, M. F., Menéndez, G., Bonavetti, V., & Irassar, E. F. (2005). Strength optimization of “tailor-made cement” with limestone filler and blast furnace slag. Cement and Concrete Research, 35(7), 1324-1331.

[10] M.M.Mustafa ,S. N Mokhatar, Z. M. Jaini, Properties of different artificial lightweight aggregates and their effect on concrete strength. Journal of Engineering and Applied Sciences ,11 , 3726- 3730 (2015)

[11] American Concrete Institute. "ACI. 211.1-91: Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete." ACI Manual of Concrete Practice (1991).

Downloads

Published

2023-12-31

How to Cite

Study of Mechanical Properties of Concrete Using Recycled Styrene-Butadiene Rubber (SBR). (2023). Journal of Basic and Applied Sciences, 24(1), 80-94. https://lafsrj.lafsrj.ly/index.php/JBAS/article/view/106

Most read articles by the same author(s)

Similar Articles

1-10 of 19

You may also start an advanced similarity search for this article.